Industrial diesel engines
Industrial diesel engines from 10 to 350 HP, air- or water-cooled, for stationary, agricultural, industrial and marine use.
The category in numbers
- Models
- 44
- Power
- 10–350 HP
- Cylinders
- 1–6
- Cooling
- Agua (18) · Aire (15)
- Aspiration
- Natural (20) · Turbo (11)
Available models
Filters
44 products
58 HP
3029DV100
John Deere
Industrial diesel engine designed for stationary applications, delivering reliable power at standard operating speeds.
View datasheet
70 HP3029TV100
John Deere
Stationary Engine | Turbo | 70 HP @ 2500 RPM – a turbocharged stationary engine designed for industrial applications.
View datasheet
80 HP4045DF150
John Deere
Stationary engine delivering 80 HP @ 2500 RPM for industrial applications.
View datasheet
125 HP4045TF250
John Deere
Turbocharged stationary engine delivering 125 HP at 2400 RPM, designed for industrial applications with mechanical fuel injection.
View datasheet
125 HP6068DF150
John Deere
Rugged industrial diesel engine designed for stationary applications, delivering reliable power across multiple RPM ratings.
View datasheet
170 HP6068TF150
John Deere
Turbocharged stationary engine delivering 170 HP at 2500 RPM, designed for industrial applications.
View datasheet
13 HP
4 LD 640
Antor · Cooling: aire
13 HP air-cooled single-cylinder direct-injection diesel engine with high torque output, for agricultural machinery, water pumps and light industrial applications.
View datasheet
17 HP4 LD 820
Antor · Cooling: aire
17 HP air-cooled single-cylinder diesel engine, the most powerful in the Antor line, for agricultural machinery, water pumps and light industrial applications.
View datasheet
105 HP
BF4L913
Beinei · Cooling: aire
Compact, air-cooled industrial diesel engine delivering reliable power of 105 HP (78.3 kW) @ 2500 RPM for a range of applications.
View datasheet
158 HPBF6L913
Beinei · Cooling: aire
158 HP industrial diesel engine designed for stationary and mobile applications, with an emphasis on reliability and efficiency.
View datasheet
27 HPF2L912
Beinei · Cooling: aire
27 HP (20.1 kW) @ 2300 RPM two-cylinder, air-cooled industrial diesel engine.
View datasheet
50 HPF3L912
Beinei · Cooling: aire
50 HP (37 kW) @ 2500 RPM three-cylinder, air-cooled industrial diesel engine.
View datasheet
68 HPF4L912
Beinei · Cooling: aire
Compact 4-cylinder diesel engine built under Deutz license, 68 HP (50 kW) @ 2500 RPM, suited for Tecfor and Bell three-wheelers.
View datasheet
75 HPF4L913
Beinei · Cooling: aire
Compact industrial diesel engine, 75 HP (55 kW) @ 2400 RPM, four cylinders, air-cooled.
View datasheet
105 HPF6L912
Beinei · Cooling: aire
Six-cylinder industrial diesel engine delivering robust power suited for industrial and power-generation applications.
View datasheet
114 HPF6L913
Beinei · Cooling: aire
6-cylinder diesel engine delivering robust power output, designed for industrial applications requiring reliable performance.
View datasheet
130 HP
4BTA3.9
Cummins · Cooling: agua
Turbocharged diesel engine available in three power ratings (80/100/130 HP @ 2400 RPM), designed for industrial applications requiring reliable performance.
View datasheet
180 HP6BTA5.9
Cummins · Cooling: agua
Diesel engine delivering 150/180 HP @ 2500 RPM with turbocharged performance, suited for industrial applications.
View datasheet
215 HP6CTA8.3
Cummins · Cooling: agua
Rugged industrial diesel engine offered through Rasa Motores, a distributor with technical support and assistance always available.
View datasheet
210 HPB210
Cummins · Cooling: agua
210 HP industrial diesel engine operating at 2500 RPM, suited for industrial applications requiring reliable power generation.
View datasheet
10 HP
HR186F
Hi-Earns · Cooling: aire
10 HP single-cylinder diesel engine designed for stationary applications, with electric start and air cooling.
View datasheet
14 HPHR192F
Hi-Earns · Cooling: aire
Single-cylinder diesel engine designed for industrial and stationary applications, with reliable electric start.
View datasheet
16 HPHR198F
Hi-Earns · Cooling: aire
Sawmill engine; single-cylinder diesel engine designed for stationary industrial applications.
View datasheet
21 HPHR292
Hi-Earns · Cooling: aire
Ideal for sawmills; compact diesel engine designed for industrial applications requiring reliable continuous operation.
View datasheet
30 HPHR2V98F
Hi-Earns · Cooling: aire
30 HP (22.3 kW) @ 3600 RPM industrial diesel engine designed for stationary applications.
View datasheet
90 HP
4JB1T
Isuzu · Cooling: agua
Compact, naturally aspirated diesel engine delivering reliable power for industrial applications.
View datasheet
31 HP
Industrial SA315i2
Lister Petter · Cooling: agua
Three-cylinder, 1.5 L naturally aspirated industrial diesel engine rated 23 kW (31 HP) at 3000 RPM. It is the only engine in the Starlite industrial range with three cylinders and an electronic fuel system, and the one with the lowest heat rejection (15 kW), so it fits where space and ventilation are the constraint.
View datasheet
39 HPIndustrial SA423i1
Lister Petter · Cooling: agua
Four-cylinder, 2.3 L naturally aspirated diesel engine with a mechanical fuel pump, rated 29.1 kW (39 HP) at 2600 RPM. It is the entry point into the four-cylinder blocks: more displacement than the three-cylinder without changing fan size, because heat rejection stays at 23.4 kW.
View datasheet
53 HPIndustrial SA427i1
Lister Petter · Cooling: agua
Four-cylinder, 2.7 L naturally aspirated diesel engine rated 39.7 kW (53.2 HP) at 2650 RPM. Bore grows to 90 mm and stroke to 105 mm over the SA423; heat rejection climbs to 31 kW, which calls for the F420 fan.
View datasheet56 HPIndustrial SA427i2
Lister Petter · Cooling: agua
2.7 L naturally aspirated diesel engine: the same block as the SA427i1, rated at 3000 RPM to deliver 56 HP. You gain close to 3 HP in exchange for 350 RPM more, which suits equipment that requires a 3000 RPM input.
View datasheet
60 HPIndustrial SA432i1
Lister Petter · Cooling: agua
Four-cylinder, 3.2 L naturally aspirated diesel engine rated 45 kW (60.3 HP) at 2600 RPM. It is the most restrained variant of the SA432 block: 35 kW heat rejection and 233.4 m³/h intake, the lowest figures in the family.
View datasheet71 HPIndustrial SA432i2
Lister Petter · Cooling: agua
Turbocharged 3.2 L diesel engine rated 53.3 kW (71.5 HP) at the same 2600 RPM as the SA432i1. The turbo nearly doubles intake air flow (439.3 against 233.4 m³/h) and moves the fan up to F490, while heat rejection only rises from 35 to 37 kW.
View datasheet87 HPIndustrial SA432i3
Lister Petter · Cooling: agua
Turbocharged 3.2 L diesel engine rated 65 kW (87.2 HP) at 2600 RPM, the highest output of the block at that speed. It shares intake flow (439.3 m³/h) and the F490 fan with the SA432i2, but 45 kW of heat have to be rejected instead of 37: the radiator sets the limit.
View datasheet72 HPIndustrial SA432i4
Lister Petter · Cooling: agua
3.2 L naturally aspirated diesel engine that states its 45 kW at 3000 RPM, that is 72.4 HP. It reaches SA432i2 power through engine speed rather than boost, so it keeps the F450 fan and 269.3 m³/h of intake air.
View datasheet86 HPIndustrial SA432i5
Lister Petter · Cooling: agua
Turbocharged 3.2 L diesel engine rated 86 HP at 3000 RPM, the only SA432 variant combining boost with high engine speed. Output is comparable to the SA432i3 but delivered 400 RPM higher, for equipment whose input is fixed at 3000 RPM.
View datasheet
99 HPIndustrial SA435i1
Lister Petter · Cooling: agua
Turbocharged four-cylinder, 3.5 L diesel engine rated 73.5 kW (98.6 HP) at 2600 RPM: the most powerful engine in the Starlite industrial range. It differs from the SA432 in stroke, 115 mm instead of 105, and in what it demands around it: 50.6 kW of heat and 480.5 m³/h of air.
View datasheet
44 HP
D703E0.MTP
VM Motori
Compact diesel engine designed for industrial applications, with robust power delivery and optimized fuel consumption.
View datasheet
56 HPD753TE3.MTP
VM Motori
Compact, efficient diesel power unit for industrial applications, with a three-cylinder configuration optimized for moderate-RPM operation.
View datasheet
84 HPD754TPE2.MTP
VM Motori
Compact four-cylinder diesel engine delivering a robust 84 HP (62 kW) @ 2300 RPM for industrial applications.
View datasheet
139 HPD756IPE2.MTP
VM Motori
In-line 6-cylinder diesel engine designed for industrial applications, with substantial power delivery at moderate RPM.
View datasheet
170 HP
MR504
VM Motori Marine · Cooling: agua
Compact and lightweight VM MR504 engine, delivering performance and reliability across a range of operating conditions.
View datasheet
270 HPMR506 (variantes: MR506SS3, MR506SH3)
VM Motori Marine
Reliable, fast, eco-friendly engine with low noise levels, designed to meet the needs of every boat owner.
View datasheet
230 HPMR704
VM Motori Marine · Cooling: agua
170 to 230 HP @ 3800 RPM. Turbocharged four-stroke marine engine designed for compact installations with reliable performance.
View datasheet
350 HPMR706
VM Motori Marine · Cooling: agua
Four-stroke marine engine delivering excellent performance with low fuel consumption, in compact dimensions suited for reduced installation spaces.
View datasheetHow to choose
Three figures drive the choice of engine: the continuous power the driven equipment demands, the speed it will run at, and the cooling type. Air-cooled engines need no radiator or coolant circuit, which simplifies installation and field maintenance; water-cooled engines hold continuous loads and enclosed spaces better. Turbocharging delivers more power from the same displacement, in exchange for stricter filtration and oil care.
If you have the datasheet of the equipment you need to drive, or the sizing calculation, send it over and we will tell you which models fit: contact us.
Brands
- John Deere
- Antor
- Beinei
- Cummins
- Hi-Earns
- Isuzu
- Lister Petter
- VM Motori
- VM Motori Marine